Hauthane HD-2117

An extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties.

Suggested Uses: HD-2117 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance.

Characteristics:

  • Outstanding water and chemical resistance
  • Fast early water resistance development
  • Can be crosslinked to enhance performance
  • Dilution and clean-up with ordinary tap water
  • Contains n-methyl pyrrolidone (NMP) co-solvent

Downloads

HD-2117 Data Sheet

Physical Properties

Solids
35 %
Solids Tolerance
± 1 %
Viscosity
50 to 150 cps
pH8.5 to 10.0
Density8.7 lb/gal
Softening Point
350 ºF
Volatile Organic Compounds (VOC) Content (As Supplied)
134 g/L

Tensile Properties

Elongation
50 %
Tensile Strength
>4850 psi
Note
Tested at 2 Inches/Minute

Application

HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

Drying

HD-2117 may be dried at ambient temperatures with supplemental co-solvent addition of 5 % DPM or DPnB on total formulation weight. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties without additional co-solvent.