Hauthane HD-2602

An aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion.

Suggested Uses: HD-2602 was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.


  • May be formulated into low surface tension coatings
  • Excellent abrasion resistance
  • Non-fugitive silicone component
  • Crosslinkable for improved adhesion and performance
  • Contains n-methyl pyrrolidone co-solvent


Hauthane HD-2602 Data Sheet

Physical Properties

Solids 35 %
Solids Tolerance
± 1 %
50 to 500 cps
pH7.0 to 9.5
8.7 lb/gal
Softening Point
305 ºF
Volatile Organic Compounds (VOC) Content (As Supplied)
105 g/L
Sward Hardness

Tensile Properties

300 %
Tensile Strength
>6375 psi
100 % Modulus
3180 psi
200 % Modulus
4610 psi
Tested at 20 inches/minute


HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.


HD-2602 can be air dried, if desired, depending on film thickness. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.