Hauthane HD-3011

A low cost, aromatic, polyether-based, aqueous polyurethane dispersion.

Suggested Uses: HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.


  • Medium soft, tough, flexible film
  • Unusually dry surface for non-blocking applications
  • High melting for thermal stability
  • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion.
  • Excellent hydrolytic stability
  • Contains n-methyl pyrrolidone (NMP) co-solvent


HD-3011 Data Sheet

Physical Properties

Solids35 %
Solids Tolerance
± 1 %
Viscosity50 to 200 cps
pH7.0 to 9.5
8.4 lb/gal
Softening Point
300 ºF
Volatile Organic Compounds (VOC) Content (As Supplied)
62 g/L
Sward Hardness

Tensile Properties

450 %
Tensile Strength
>4000 psi
100 % Modulus
1100 psi
200 % Modulus
1600 psi
300 % Modulus
2000 psi
Tested at 20 inches/minute


HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods.


HD-3011 can be air dried at ambient room temperatures. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.